There are mainly the following connection methods between transformer and power equipment:
1. Terminal board connection method: this is a commonly used connection method to connect the transformer and power equipment through the terminal board. The terminal board is divided into two types: screw type and plug type, which can be selected according to specific needs. When connecting, you need to connect the same polarity line to the same terminal board, and keep the tightness of the line to ensure stable and reliable connection.
2. Direct connection method: If the transformer and power equipment line input and output are determined, and wire diameter, voltage level and other parameters match, you can directly connect the two wires, do not need to use the terminal board. This connection method is simple and direct, but care needs to be taken to ensure that the connection is tight to prevent loosening due to vibration and other reasons.
3. Manual transmission method: For high-power power equipment, in order to minimize the impact of the power supply on the equipment, it is necessary to use procedures for transmission. This method requires specialized transmission equipment and procedures to ensure the safe and stable operation of power equipment.
In addition, there are distribution panel side connection method and intermediate connection method. The distribution panel side connection method is to connect the transformer directly to the distribution panel side and use screws to fix it. This connection method requires attention to the way of connection to ensure that the connection line is tight and will not be loosened due to vibration and other reasons. The intermediate connection method is to set up an intermediate box between the transformer and the switchboard for connection, and this method allows the transformer to be more freely placed in the appropriate position. Configuration requires the selection of an appropriate transformer model based on electrical load characteristics.
When choosing the connection method between the transformer and the electrical equipment, it is necessary to choose according to the specific situation. Factors such as the power of the equipment, voltage level, wire diameter and other factors, as well as the tightness and safety of the connection, need to be taken into account. At the same time, attention also needs to be paid to comply with the relevant electrical safety norms to ensure the safety and reliability of the connection process.
Follow us and you will learn more about transformers and energy conversion.
Hevin Tang
---------------------------------------------------------------------------------
Jiangsu Yawei Transformer Co.,Ltd.
Jiangsu Yawei Electric Power Engineering Co.,Ltd.
Add: No.265,West Huanghai Avenue,Haian City, Jiangsu Province,China
Hevin Tang (Export Manager)
Wechat：Hevin88888
Mob/WhatsApp: +86 188 6272 9569
Email:Hevin@yaweitransformer.com
Web: www.yaweitransformer.com
